GL Enhances Direct T1 E1 DS0 Access for SONET SDH

Gaithersburg, Maryland, USA – January 18, 2016 - GL Communications Inc., announced today its enhanced OC3/12 and STM1/4 Analysis and Emulation Platform referred to as LightSpeed1000™.  Among its many features is direct access to any or all T1s E1s (336 T1s = 16,128 DS0s, or 252 E1s = 15,624 DS0s) inside the OC-12 STM-4.

LightSpeed1000™ Channelized T1E1 Emulation and analysis

Speaking to the press, Mr. Jagdish Vadalia, a Senior Manager for product development of the company said, “GL's LightSpeed1000™ comes with all the necessary software for capturing, monitoring, emulation, and protocol analysis over SONET-SDH links, with a price tag that compares very favorably with similar test instruments at 3 times the price.”

He added, “LightSpeed1000™ supports both Channelized and Unchannelized modes. 2 out of the 4 ports are meant for SONET/SDH Unchannelized and unframed data. The remaining 2 ports can be either SONET/SDH or GigE (future) ports meant for Channelized T1 E1.

Mr. Vadalia further added, “The enhanced GL’s LightSpeed1000™ platform in Channelized Mode provides simplicity and permits direct DS0 level access to hundreds of T1s and E1s within OC-3 STM-1/OC-12 STM-4, and in the near future all the E3s and T3s constituting the OC-3 and STM-1. This platform with its unique architecture eliminates the requirement for external multiplexing hardware and hundreds of cables and connectors. Multiple, interdependent streams of any user-defined capacity can be generated internally, analyzed, and monitored in real-time.”  



Important Features

  • 2 Channelized OC-3 STM-1/OC-12 STM-4 SONET/SDH interfaces per Lightspeed1000™ card
  • 2 Unchannelized OC-3 STM-1/OC-12 STM-4 interfaces per Lightspeed1000™ card
  • Channelized ports act as terminal multiplexers and demultiplexers
  • Allows direct access to anything and everything on SONET / SDH - Framing and Payload, including structured traffic (DS0, T1, E1, STS-1, DS3 etc) or unstructured traffic (ATM, PoS, etc).
  • Scans the received STM-4/STM-1 traffic and identifies the mapping, tributary type [T1/E1], equipped/unequipped status of the tributaries
  • Broadcasts the selected T1/E1 channel data on all the 252 E1’s or 336 T1’s
  • Supports any combination of DS0/64/56/16/8 kbps fractional T1/E1, and N x T1/E1 interface definitions (a total of 252 E1s or 336 T1s – in each port )
  • Pluggable SFPs allow Single-mode (SM), and Multi-mode (MM) fiber optic non-intrusive tap
  • API for Microsoft® Windows® and Linux operating Systems to develop user specific applications 
  • Key T1 E1 specific features -
    • Comprehensive protocol analysis and emulation - HDLC, SS7, ISDN, CAS, PPP, Frame Relay, ATM and more
    • Analysis of DS0s for frequency, power level, spectral display, listen to channel
    • GL's proven WCS high level remote interface
    • All protocols analyzers can be used with GL's NetSurveyorWeb™


Applications for Direct T1 E1 within SONET SDH

  • GL's MAPS™ GSM simulation over A Interface simulates BSSMAP & DTAP messages and signaling specification as defined by 3GPP standards
  • Monitoring GSM Abis link over channelized OC-3 STM-1 for monitoring RF information, Roaming, SMS, Location update, and more
  • GL's MAPS™ SS7 simulation over TDM (T1E1) simulates Service Switching Point (SSP). The ISUP signaling specification conforms to ITU-T and ANSI standards
  • Testing voice and data services on hybrid networks (such as ATM to SDH)
  • Non-intrusive protocol analysis and monitoring (ex: Monitor tens to hundreds of SS7 links for signaling and bearer channels)

Back to Press Releases Index Page Back to Press Releases Index Page